What machine are these parts coming from?

These parts are from a CAT D9T Crawler Tractor, serial RJS01075, currently being dismantled in Kentucky (KY).

How many hours are on the major components?

The engine, transmission, torque converter, and final drives each have about 4,500 hours.

Where are the parts located?

All components are located in Kentucky (KY), USA, unless noted otherwise on your quote or invoice.

Are these parts from a running machine?

Yes, the CAT D9T was operational at dismantling; parts were removed in good used condition.

Are other parts available from this D9T?

Yes, smaller parts and attachments may also be available. Please contact us with part numbers or requirements.

What is included with the 'Engine Complete (4,500 hours) – 18,500 USD'?

The complete engine is the pulled assembly, usually including the block, head, injectors, turbo, and mounted accessories; ancillaries such as ECMs, wiring, and cooling packages may be priced separately on request.

Is the engine tested or inspected?

The engine ran before dismantling. It is visually inspected for major defects. Additional tests, photos, and service history can be provided upon request.

What is included with the 'Transmission (4,500 hours) – 12,000 USD'?

The transmission is sold as a complete used assembly, ready for core exchange or installation, subject to buyer’s inspection and any required resealing or bench testing.

What is included with the 'Torque (4,500 hours) – 8,000 USD'?

The torque converter unit is sold as a used assembly from the tractor’s powertrain; buyer inspection or bench testing is recommended prior to installation.

Are the 'Final Drives (4,500 hours) – 14,000 USD each' sold individually or as a pair?

Final drives are priced per side at 14,000 USD; buyers may purchase one or a matched pair as needed.

What is included in the 'Cab & Base – 11,000 USD'?

The cab & base usually includes the operator cab shell with doors, glass (when reusable), controls as remaining, and base structure; seats, electronics, and interior trim may vary by condition and can be confirmed at quote.

What does the 'Blade Group (dual tilt) – 18,000 USD' consist of?

The blade group includes the main blade structure and dual-tilt hardware; push arms, trunnions, and cutting edges can be confirmed and itemized as needed.

Are the 'Blade Lift Cylinders – 3,000 USD each' priced individually?

Yes, blade lift cylinders are priced at 3,000 USD each; a matched set can be supplied if both are needed.

What is included with the 'Ripper (single shank) – 19,500 USD'?

The ripper assembly is single-shank, typically including the ripper frame, lift and tilt cylinders, and a shank if available; tip and wear parts are subject to condition and may be considered consumables.

Are the listed prices firm?

Listed prices (USD) are asking prices and may change based on condition verification, market demand, and availability at order.

Are these parts sold 'as-is'?

Unless agreed in writing, all components are sold in used 'as-is, where-is' condition; buyers are encouraged to request photos, inspections, or third-party reports before purchase.

Is there any warranty on these components?

These are used dismantled components and are generally sold without warranty; any limited guarantees or start‑up conditions must be agreed on a case‑by‑case basis in the sales contract.

How long will parts from this D9T be available?

Parts are available first-come, first-served and may be sold anytime; contact us promptly to reserve or hold with payment.

Do you offer shipping for these CAT D9T parts?

Yes, we can assist with domestic and international freight quotes for all major components; shipping costs, insurance, and duties are the buyer’s responsibility.

Are core returns required?

These items are sold outright with no core charge, but sometimes better pricing may be available with a core return; please ask when requesting a quote.

How can I order or reserve a component from this machine?

Contact us with the component description (e.g., 'CAT D9T Engine Complete 4,500 hrs – 18,500 USD') and your company details; we will confirm availability, final pricing, and send a proforma invoice.

Can you help confirm fitment on my machine?

Yes, if you provide your machine model and serial number, we can help verify compatibility; final fitment responsibility remains with the buyer, so we recommend cross-checking part numbers with your local CAT dealer.

CAT D9T Crawler Tractor Parts For Sale KY Verified listing

Used Plant Equipment For Sale Description

CAT D9T Crawler Tractor Parts

CAT D9T Crawler Tractor Parts – Currently Dismantling for Parts

💰 Price & Location

Location: Kentucky, USA

Status: Dismantling – Parts Available Now

Pricing Range: $3,000 – $19,500 USD, depending on component

⚙️ Equipment Specifications

Make	Caterpillar
Model	D9T
Machine Type	Crawler Tractor / Dozer
Serial Number	RJS01075
Powertrain Hours	Approx. 4,500 Hours
Status	Dismantling for Parts

⭐ Key Features

Low-hour powertrain components (approx. 4,500 hours)
Complete engine package available
Heavy-duty transmission and torque converter
Dual tilt blade group
Single shank ripper assembly
Final drives available individually
OEM Caterpillar components – ready for rebuild or replacement

🔢 Serial Number

RJS01075

Condition

USED – DISMANTLING FOR PARTS

📸 Photos & Videos

☑ Machine overview photos
☑ Engine & powertrain images
☑ Blade & ripper visuals

💲 Pricing

Engine Complete (4,500 hrs): $18,500
Transmission (4,500 hrs): $12,000
Torque Converter (4,500 hrs): $8,000
Final Drives (4,500 hrs): $14,000 each
Cab & Base: $11,000
Blade Group (Dual Tilt): $18,000
Blade Lift Cylinders: $3,000 each
Ripper (Single Shank): $19,500

Payment Options: Bank Transfer, Wire, Approved Financing

📍 Location & Contact

Location: Kentucky, USA

Availability: Immediate – Parts Ready for Dispatch

Contact: Available upon request

🔎 Search Tags

#CATD9TParts #CaterpillarDozerParts #D9TForBreaking #HeavyEquipmentParts #DozerPartsForSale
#UsedCATParts #ConstructionEquipmentParts #CrawlerTractorParts #CATPowertrain
#FinalDrivesForSale #DozerEngineForSale #RipperAssembly #BladeGroup #PlantMachineryParts
#EquipmentDismantling #HeavyMachineryUSA #KentuckyEquipment

About the Seller

Strickland Equipment Company

Your Trusted Partner for Quality Used Equipment

Contact Information

Primary Contact	Mike Berry
Office Phone	+1 (972) 713-0208
Cell Phone	+1 (214) 957-7106
Email	[email protected]
Website	www.stricklandequipment.com

Location & Hours

Address:
6902 Spanky Branch Drive
Dallas, Texas 75248-1528
United States

Business Trading Hours:
Monday – Friday: 8:00 AM – 6:00 PM
Saturday: 8:00 AM – 1:00 PM
Sunday: Closed

About Strickland Equipment Company

Strickland Equipment Company specializes in sourcing and supplying high-quality used construction and mining machinery to contractors and businesses nationwide. With decades of industry experience, we guide you from initial inquiry through delivery—ensuring you find the right equipment at the right price.

We maintain deep relationships with both buyers and sellers, offering expertise across excavators, loaders, dozers, crushers, and more. Our commitment to service and reliability distinguishes us as your go-to partner for used equipment needs.

Used Plant Equipment Specifications

CAT D9T Crawler Tractor – Key Specifications

Category	Specification	Value / Detail
Engine	Model	Cat C18 ACERT diesel
	Gross power	464 hp (346 kW) @ 1,800 rpm
	Net power	410 hp (306 kW) @ 1,800 rpm
	Displacement	18.1 L (1,106 cu in)
	Emissions	Tier 2/3 and Tier 4 Final variants (by build/market)
Operating weight	Typical operating weight	≈ 105,600 lb (47,900 kg)
Capacities	Fuel tank	235 gal (889 L)
	Cooling system	27.5 gal (104 L)
	Engine oil	10 gal (38 L)
	Powertrain (incl. transmission)	43.4 gal (164 L)
	Hydraulic tank/fluid	23.5 gal (89 L)
	Final drive oil (each side)	3.9 gal (15 L)
Electrical	System voltage	24 V
	Alternator	≈ 95 A
Transmission	Type	Power‑shift, planetary
	Speeds	3 forward / 3 reverse
	Max forward speed	≈ 7.3 mph (11.7 km/h)
	Max reverse speed	≈ 8.9 mph (14.3 km/h)
Undercarriage	Track gauge	≈ 7.4 ft (2,250 mm)
	Standard shoe width	24 in (610 mm)
	Shoes per side	43
	Track rollers per side	8
	Track pitch	9.4 in (240 mm)
	Ground contact area	6,569 in² (4.24 m²)
	Ground pressure	≈ 16.1 psi
Dimensions	Length without blade	≈ 16.1 ft (4,912 mm)
	Length with standard blade	≈ 21.8 ft (6,630 mm)
	Width over tracks	≈ 9.4 ft (2,865 mm)
	Height to top of cab	≈ 12.5 ft (3,815 mm)
	Track length on ground	≈ 11.4 ft (3,474 mm)
	Ground clearance	≈ 2.0 ft (596 mm)
Blade (SU typical)	Blade width	≈ 14.3 ft (4,310 mm)
	Blade height	≈ 6.4–6.5 ft (≈1,934 mm)
	Blade capacity	≈ 17.7 yd³ (13.5 m³)
	Max cutting depth	≈ 23.9 in (606 mm)
Hydraulics	Implement pump type	Piston pump
	Implement pump flow	≈ 101 gal/min (383 L/min)
	Main relief valve pressure	≈ 5,875 psi (40,500 kPa)

Disclaimer:

We provide these specification details for general reference only. Actual specifications may vary based on the country of manufacture, specific sub-model, and installed options. You should verify all technical information and features with the manufacturer or your local dealer before making a purchase or rental decision. We assume no liability for any inaccuracies or omissions in this information.

Plant Equipment FAQs

CAT D9T Parts – Frequently Asked Questions

General Machine FAQs

Q: What machine are these parts coming from?: A: These parts are from a CAT D9T Crawler Tractor, serial RJS01075, currently being dismantled in Kentucky (KY).
Q: How many hours are on the major components?: A: The engine, transmission, torque converter, and final drives each have about 4,500 hours.
Q: Where are the parts located?: A: All components are located in Kentucky (KY), USA, unless noted otherwise on your quote or invoice.
Q: Are these parts from a running machine?: A: Yes, the CAT D9T was operational at dismantling; parts were removed in good used condition.
Q: Are other parts available from this D9T?: A: Yes, smaller parts and attachments may also be available. Please contact us with part numbers or requirements.

Engine & Powertrain FAQs

Q: What is included with the “Engine Complete (4,500 hours) – 18,500 USD”?: A: The complete engine is the pulled assembly, usually including the block, head, injectors, turbo, and mounted accessories; ancillaries such as ECMs, wiring, and cooling packages may be priced separately on request.
Q: Is the engine tested or inspected?: A: The engine ran before dismantling. It is visually inspected for major defects. Additional tests, photos, and service history can be provided upon request.
Q: What is included with the “Transmission (4,500 hours) – 12,000 USD”?: A: The transmission is sold as a complete used assembly, ready for core exchange or installation, subject to buyer’s inspection and any required resealing or bench testing.
Q: What is included with the “Torque (4,500 hours) – 8,000 USD”?: A: The torque converter unit is sold as a used assembly from the tractor’s powertrain; buyer inspection or bench testing is recommended prior to installation.
Q: Are the “Final Drives (4,500 hours) – 14,000 USD each” sold individually or as a pair?: A: Final drives are priced per side at 14,000 USD; buyers may purchase one or a matched pair as needed.

Undercarriage, Cab & Attachments FAQs

Q: What is included in the “Cab & Base – 11,000 USD”?: A: The cab & base usually includes the operator cab shell with doors, glass (when reusable), controls as remaining, and base structure; seats, electronics, and interior trim may vary by condition and can be confirmed at quote.
Q: What does the “Blade Group (dual tilt) – 18,000 USD” consist of?: A: The blade group includes the main blade structure and dual-tilt hardware; push arms, trunnions, and cutting edges can be confirmed and itemized as needed.
Q: Are the “Blade Lift Cylinders – 3,000 USD each” priced individually?: A: Yes, blade lift cylinders are priced at 3,000 USD each; a matched set can be supplied if both are needed.
Q: What is included with the “Ripper (single shank) – 19,500 USD”?: A: The ripper assembly is single-shank, typically including the ripper frame, lift and tilt cylinders, and a shank if available; tip and wear parts are subject to condition and may be considered consumables.

Pricing, Condition & Availability FAQs

Q: Are the listed prices firm?: A: Listed prices (USD) are asking prices and may change based on condition verification, market demand, and availability at order.
Q: Are these parts sold “as-is”?: A: Unless agreed in writing, all components are sold in used “as-is, where-is” condition; buyers are encouraged to request photos, inspections, or third-party reports before purchase.
Q: Is there any warranty on these components?: A: These are used dismantled components and are generally sold without warranty; any limited guarantees or start‑up conditions must be agreed on a case‑by‑case basis in the sales contract.
Q: How long will parts from this D9T be available?: A: Parts are available first-come, first-served and may be sold anytime; contact us promptly to reserve or hold with payment.

Shipping, Cores & Ordering FAQs

Q: Do you offer shipping for these CAT D9T parts?: A: Yes, we can assist with domestic and international freight quotes for all major components; shipping costs, insurance, and duties are the buyer’s responsibility.
Q: Are core returns required?: A: These items are sold outright with no core charge, but sometimes better pricing may be available with a core return; please ask when requesting a quote.
Q: How can I order or reserve a component from this machine?: A: Contact us with the component description (e.g., “CAT D9T Engine Complete 4,500 hrs – 18,500 USD”) and your company details; we will confirm availability, final pricing, and send a proforma invoice.
Q: Can you help confirm fitment on my machine?: A: Yes, if you provide your machine model and serial number, we can help verify compatibility; final fitment responsibility remains with the buyer, so we recommend cross-checking part numbers with your local CAT dealer.

Google Ad

Add Your Used Plant Equipment to PlantClassifieds

You can boost your business visibility by listing your plant equipment for sale in the PlantClassifieds directory.

Plant Category

Equipment Parts

Equipment Images

CAT D9T Crawler Tractor Parts Dismantling side view

CAT D9T Crawler Tractor Parts Dismantling front right side view

CAT D9T Crawler Tractor Parts Blade Group rear view

CAT D9T Crawler Tractor Parts Ripper Single Shank

CAT D9T Crawler Tractor Parts Blade Group

Equipment Make

Equipment Parts

Equipment Model

CAT D9T Crawler Tractor Parts For Sale KY

Power Source

Diesel

Serial Number

RJS01075

Google Ad

Equipment Sellers Name

Strickland Equipment Company

Open

Open hours today: 08:00 - 18:00

Monday

08:00 - 18:00
Tuesday

08:00 - 18:00
Wednesday

08:00 - 18:00
Thursday

08:00 - 18:00
Friday

08:00 - 18:00
Saturday

08:00 - 13:00
Sunday

Closed

15/06/2026 15:04 local time

Social Networks

Location

Kentucky, USA

Get Directions

Region

United States

No comments yet.

CAT D9T Crawler Tractor Parts For Sale KY Verified listing

CAT D9T Crawler Tractor Parts For Sale KY Verified listing

Used Plant Equipment For Sale Description

CAT D9T Crawler Tractor Parts – Currently Dismantling for Parts

💰 Price & Location

⚙️ Equipment Specifications

⭐ Key Features

🔢 Serial Number

Condition

📸 Photos & Videos

💲 Pricing

📍 Location & Contact

🔎 Search Tags

About the Seller

Strickland Equipment Company

Contact Information

Location & Hours

About Strickland Equipment Company

Used Plant Equipment Specifications

CAT D9T Crawler Tractor – Key Specifications

Disclaimer:

Plant Equipment FAQs

CAT D9T Parts – Frequently Asked Questions

General Machine FAQs

Engine & Powertrain FAQs

Undercarriage, Cab & Attachments FAQs

Pricing, Condition & Availability FAQs

Shipping, Cores & Ordering FAQs

Google Ad

Add Your Used Plant Equipment to PlantClassifieds

You can boost your business visibility by listing your plant equipment for sale in the PlantClassifieds directory.

Plant Category

Equipment Images

Equipment Make

Equipment Model

Power Source

Serial Number

Google Ad

Equipment Sellers Name

Open

Social Networks

Location

Region

Add a review

Leave a Reply · Cancel reply

You May Also Be Interested In

CAT 777D Used Parts For Sale

CAT 637E Components for Sale

Cat Components TX For Sale