General information

Q1. What type of machine is the 2019 Cedarapids 5048 Portable Impact Crusher?
A1. It is a portable horizontal shaft impact (HSI) crushing plant designed for high‑capacity primary or secondary crushing of aggregates, recycled concrete, and asphalt.

Q2. What does “5048” mean in the model name?
A2. “5048” refers to the nominal crusher size series of this horizontal shaft impactor, indicating a 50‑inch class impactor with a 4‑bar rotor designed to handle large feed sizes and high tonnage.

Q3. Is the 2019 5048 suitable for both quarry and recycling applications?
A3. Yes, Cedarapids HSI plants are engineered for hard rock, sand and gravel, and recycled materials such as concrete and asphalt, making the 5048 a versatile unit for multiple applications.

Specifications and capacity

Q4. What is the typical power requirement for the 2019 Cedarapids 5048 impactor?
A4. Comparable Cedarapids HSI plants in this size range usually run a 300 hp class main drive motor, with additional motors for the feeder, screen, and conveyors.

Q5. What production capacity can I expect from a 2019 5048 portable impact plant?
A5. Depending on configuration and material, Cedarapids horizontal HSI plants in the 50‑inch class can typically achieve up to 400–500 tonnes per hour in suitable conditions.

Q6. Does the 5048 portable impact come with an onboard screen?
A6. Many 5048 plants are configured as closed‑circuit systems with an onboard 2‑deck or 3‑deck screen and a return conveyor, allowing finished product sizing and oversize recirculation on a single chassis.

Q7. How is the plant transported?
A7. The 2019 Cedarapids 5048 Portable Impact Crusher is mounted on a multi‑axle wheeled chassis designed for highway transport, with fold‑up conveyors and components to reduce transport dimensions.

Applications and materials

Q8. What materials can the 2019 5048 HSI process?
A8. It can process shot rock, limestone, gravel, recycled concrete, asphalt rubble, and similar medium‑abrasion materials commonly found in quarrying and recycling operations.

Q9. Is it suitable for highly abrasive materials?
A9. HSIs like the 5048 can handle abrasive feeds but will experience increased wear; for very high‑abrasion stone, operators often balance production benefits against higher blow bar and liner consumption.

Q10. Can the machine produce multiple aggregate sizes in one pass?
A10. In a closed‑circuit configuration with a multi‑deck screen, the plant can produce several finished sizes simultaneously while recirculating oversize back to the impactor.

Operation and setup

Q11. How long does it take to set up the 2019 5048 portable impact plant on site?
A11. Cedarapids portable systems are designed for relatively fast setup, with pre‑engineered modules, fold‑out conveyors, and integrated wiring that help reduce on‑site assembly time compared to custom plants.

Q12. How many operators are typically required?
A12. A typical setup uses one loader or excavator operator plus one plant operator, though staffing can vary depending on site safety policies and the complexity of the overall operation.

Q13. Is the plant controlled from a central panel?
A13. Yes, modern Cedarapids portable impact plants use a centralised electrical control panel for starting, stopping, and monitoring the crusher, feeder, screen, and conveyors.

Q14. Can the 5048 plant integrate into an existing spread?
A14. The plant can be fed by existing upstream equipment and discharge to downstream conveyors or stockpiles, and is commonly integrated into multi‑stage crushing spreads.

Wear parts and maintenance

Q15. What are the main wear parts on a 5048 HSI?
A15. The key wear components are blow bars, breaker plates, side liners, and apron liners, all of which are replaceable and available in different metallurgy options to match material abrasiveness.

Q16. How often do blow bars need replacing?
A16. Blow bar life depends heavily on feed material, rotor speed, and operating practices; in typical aggregate and recycling work, replacement intervals can range from days to several weeks of production.

Q17. Is the 2019 5048 designed for easy maintenance access?
A17. Cedarapids HSI plants provide maintenance access via hydraulic opening of the crusher housing and strategically placed inspection and service points to simplify blow bar and liner changes.

Q18. Are parts readily available?
A18. Cedarapids has an established global distribution network, so critical wear and replacement parts for the 5048 series are generally available through authorised dealers and parts distributors.

Power, fuel, and efficiency

Q19. Is the 2019 Cedarapids 5048 electrically powered or diesel‑hydraulic?
A19. Many Cedarapids portable impact plants in this size class use electric drives powered by an external genset or site power, though exact configuration depends on how the 2019 unit was ordered.

Q20. How fuel‑efficient is the plant in mobile operations?
A20. When a diesel generator supplies electric power, overall fuel efficiency is influenced by load factor, material hardness, and plant configuration; Cedarapids designs focus on high throughput per litre of fuel.

Safety and compliance

Q21. What safety features are included on a 2019 5048 portable impact crusher?
A21. Typical safety provisions include emergency stop circuits, guarding on moving parts, lockout/tagout points, and walkways or platforms with handrails where fitted.

Q22. Does the plant meet current regulatory requirements?
A22. A 2019 unit is designed to comply with contemporary safety and electrical standards at the time of manufacture; site operators must ensure it also meets local regulations for dust, noise, and guarding.

Buying, renting, and suitability

Q23. Is the 2019 5048 a good option for rental fleets?
A23. Yes, its portability, broad application range, and relatively quick setup make the 5048 HSI a strong candidate for rental and contract crushing fleets.

Q24. What should I check when inspecting a used 2019 5048?
A24. Focus on blow bar and liner wear, rotor condition, bearing noise or play, frame and chassis cracks, screen and conveyor wear, hydraulic leaks, and the condition of the electrical system and control panel.

Q25. How do I know if a 2019 Cedarapids 5048 is the right crusher for my job?
A25. If you need a high‑capacity portable plant for aggregates or recycling, with flexibility for different feed types and finished sizes, a 5048 HSI is usually a strong fit; very hard or ultra‑abrasive rock may favour other crusher types.

Cedarapids Ownership and Background

Ownership Today

• As part of Terex Materials Processing, Cedarapids is one of the legacy crushing and screening brands under Terex Minerals Processing Systems (Terex MPS).
• Terex completed the acquisition of Cedarapids, Inc. in 1999 and has continued to use the Cedarapids name as “Cedarapids – a Terex company,” maintaining the brand’s identity within its business structure.

Brief Background

• Originally established in 1923 as the Iowa Manufacturing Company of Cedar Rapids, the company was renamed Cedarapids in 1985, reflecting its roots and evolution before joining Terex.
• Following the 1999 acquisition, Terex later grouped Cedarapids with Simplicity, Canica, and Jaques to form Terex Minerals Processing Systems (now Terex MPS), leading to the current organisational structure.