CAT D6H LGP Series 2 — Frequently Asked Questions

What engine does the CAT D6H LGP Series 2 have?
It is equipped with a Caterpillar 3306 engine, a 10.5-liter displacement producing around 170 horsepower (126.8 kW).

What is the operating weight of this crawler tractor?
The operating weight is approximately 19,814 kg (43,682 lbs).

What is the fuel capacity?
The fuel tank capacity is about 337 liters (89 gallons).

What type of transmission does it use?
It has a powershift transmission with three forward and three reverse gears.

What are its dimensions?
Length with blade: about 5.18 meters (17 ft), width over tracks: about 3.17 meters (10.31 ft), height to top of cab: around 3.16 meters (10.37 ft).

What are the ground contact area and ground pressure?
Ground contact area is roughly 9,253 square inches (151,639 cm²), and ground pressure is low at about 4.8 psi (0.33 bar), suitable for delicate surfaces.

What is the blade capacity and cutting depth?
Blade capacity is approximately 3.7 to 4.8 cubic meters (around 4.8 cubic yards), and the cutting depth is about 655 mm (25.8 inches).

What is the maximum speed?
Max forward speed is about 11.3 km/h (7 mph), and max reverse speed is about 14.4 km/h (9 mph).

How wide are the tracks?
Track width is about 915 mm (36 inches) with 8 track rollers per side.

What is the shipping length of the CAT D6H LGP Series 2?
The length with the blade attached is approximately 17 feet (5,180 mm).

What is the width for shipping?
The width over the tracks is about 10.3 feet (3,140 mm), making it handleable for transport without blade removal in many cases. With the blade folded (if applicable), the width narrows further for easier shipping.

What is the height to the top of the cab for shipping clearance?
The height is roughly 10.4 feet (3,160 mm).

Can the blade be folded or removed to reduce shipping dimensions?
Yes, some configurations allow the blade to fold or be removed to reduce width for shipping compliance and easier transport.

What should I consider for shipping permits based on these dimensions?
With these dimensions, wide load or oversize permits may be required depending on local transport regulations, especially for a width over 3 meters. Folded blade width can help reduce permit requirements.